Custom cufflinks and men's accessories
Cufflinks, tie bars and lapel pins are corporate-gift and wedding products as often as they are retail products, which means the order pattern is logo-driven, quantity-driven and deadline-driven rather than season-driven.
- MOQ
- 500 pcs per style, per plating colour
- Sampling
- 10 days from approved 3D file
- Bulk production
- 25 days after sample approval
- Tooling
- Quoted as a separate one-off line — see cost breakdown
Styles we produce
Cufflinks, tie bars and lapel pins are corporate-gift and wedding products as often as they are retail products, which means the order pattern is logo-driven, quantity-driven and deadline-driven rather than season-driven. Each style below is produced from the buyer's own design or developed from a reference under ODM.
01Bullet-back cufflinks 
02Whale-back cufflinks 
03Chain-link cufflinks 
04Fixed-back cufflinks 
05Tie bars 
06Tie tacks 
07Lapel pins 
08Shirt studs 
09Money clips 
10Collar stays 
11Key rings 
12Card holders
Swipe · 12 styles
Material options
Ranked by how well each metal suits this category specifically, not by price. Follow any row through to the full property table for that alloy.
| Material | Why it suits this category |
|---|---|
| 316L stainless steel | Brushed and satin finishes suit the segment; no maintenance |
| Brass | Takes enamel colour well for logo work |
| Titanium | Premium lightweight option |
| Copper & bronze | Antique and heritage finishes |
Process options
The forming and finishing routes that apply to this shape, with what each contributes. Tolerances and tooling costs are on the individual process pages.
| Process | What it contributes |
|---|---|
| Stamping | Faces and blanks at volume |
| Enameling | Brand colours in recessed cells |
| Laser engraving | Logos, initials, dates |
| Electroplating | Gold, rhodium and gunmetal finishes |
Sizing and specification
These are the dimensions a quotation needs. Sending them with the first enquiry is the difference between a one-day quote and a two-week conversation.
| Cufflink face | 12–20 mm |
|---|---|
| Cufflink back | Bullet, whale, chain, fixed |
| Tie bar length | 40 / 45 / 55 mm |
| Lapel pin | 10–25 mm |
| Material thickness | 1.5–3.0 mm |
Customisation
- Enamel colour matched to a brand reference
- Laser-engraved initials, varied piece to piece
- Presentation box with printed insert
- Mixed sets — cufflinks with matching tie bar
- Individual gift boxing for corporate distribution
Order terms
The same terms apply across every category. Tooling is always quoted as its own one-off line and is never amortised into the unit price.
| MOQ | 500 pcs per style, per plating colour |
|---|---|
| Sampling | 10 days from approved 3D file |
| Bulk production | 25 days after sample approval |
| Tooling | Quoted as a separate one-off line — see cost breakdown |
Compliance for this category
Different product shapes are held to different limits. This is the one that applies here.
Testing is arranged on request against whichever standards the destination market requires. Which tests apply, what they cost and how long they take is confirmed in writing in the quotation — see EN 1811 nickel releaseand Prop 65.
What to watch out for
Custom cufflinks and men's accessories — buyer questions
Each answer stands alone and can be read without the rest of this page.
What is the minimum order quantity for custom cufflinks & men's?
500 pieces per style, per plating colour. The per-colour part matters: each finish is a separate production batch with its own setup, so three colours of one design is three batches of 500, not one. Sampling takes about 10 days and bulk production about 25 days after sample approval.
Which metal is best for cufflinks & men's?
316L stainless steel is the usual first choice — brushed and satin finishes suit the segment; no maintenance. Brass is the alternative where takes enamel colour well for logo work. The decision is rarely about appearance, because plating can make most metals look alike; it is about how the piece behaves after six months of wear.
What compliance standard applies to cufflinks & men's?
Cufflinks and tie bars sit in intermittent rather than prolonged skin contact, so the EN 1811 nickel-release limit is applied less stringently than for earrings or rings. Lead and cadmium limits still apply in full — CA Prop 65 and CPSIA both bite on these products, particularly on free-machining brass.
What sizing information do you need to quote cufflinks & men's?
cufflink face (12–20 mm), cufflink back (Bullet, whale, chain, fixed), tie bar length (40 / 45 / 55 mm) and the finish. Sending these with the first enquiry is what turns a two-week back-and-forth into a one-day quotation, because each of them changes either the tooling or the unit price.
Can you produce cufflinks & men's from my own design files?
Yes — that is the normal route. Send CAD (.stl, .3dm, .step) or a dimensioned sketch and an engineer reviews it for manufacturability before quoting, flagging anything that will not produce as drawn. The buyer owns the design and the tooling, and an NDA is signed before files are received.
What is the most common mistake buyers make ordering cufflinks & men's?
Colour matching enamel from a screen. Enamel colour must be matched against a physical reference — a Pantone chip or an approved sample — because the fired result differs from any on-screen preview. Approving colour from a photograph is the most common cause of a rejected corporate order.
Not answered here? All buyer questions →
On the floor
The departments this category runs through · named from the factory's own signage · see all twelve
Quote a cufflinks & men's run
Send the design, the material and the quantity. You get an itemised unit price, the tooling cost as its own line, and the compliance route for your market. Production runs on our own floor in Qingxi, Dongguan, Guangdong.
- 01Reply within one working day, Guangdong business hours.
- 02Itemised cost sheet — mold quoted separately, not folded into the unit price.
- 03NDA on request before any file is shared.