Twelve departments named, eleven photographed.
The question behind every first order is not whether a supplier can make the product — it is whether there is a real production floor behind the website. So this page names each department by its own signage, states what is on it, and says plainly which capabilities are not yet evidenced by a photograph.
- Location
- Qingxi, Dongguan, Guangdong
- Established
- 2011
- Floor area
- 1,500 m²
- Production staff
- 300+
The floor
Photographs of the actual production floor, with department signage visible. No renders and no stock photography appear anywhere on this site.
eleven of the twelve rows listed below are photographed · chain making shown on the chains page, casting on the lost-wax casting page · one not yet photographed (钻孔2部) · no renders, no stock photography, machines in use.
Departments and equipment
Named from the factory's own department signage — the string in this table is the string on the wall in the photograph above. That is the point of listing them this way.
| Department | 中文 | Capability | Model |
|---|---|---|---|
| Drilling department 1 | 钻孔1部 | Bank of multi-spindle drilling and tapping machines for small components | Not published |
| Drilling department 2 | 钻孔2部 | Bench drill presses for secondary operations and short runs | Not published |
| Cutting & drilling department 3 | 切钻3部 | Automatic cut-and-drill machines plus a CNC lathe — programmed roughing and finishing passes, single pieces to repeat runs | SAKER-550H |
| Punch press department | 冲床部 | Blanking, forming and embossing from sheet and coil, plus laser cutting | Not published |
| Hydraulic press department | 油压部 | Deep forming and coining operations that exceed punch-press tonnage | BLADE-60 / BLADE-80 / BLADE-110 |
| Wire EDM room | 线割房 | Cuts our own stamping dies in-house — tooling changes do not queue behind an outside die shop | DK7732 |
| Laser welding room | 激光焊房 | Seam and spot welding under a stereo microscope for fine assemblies | Hay's Laser |
| Laser marking room | 镭射房 | Fibre laser engraving, logos and serialisation | Not published |
| Grinding & polishing room | 磨房 | Bench polishing stations on extracted benches, bulk deburring | Not published |
| Ultrasonic cleaning room | 清洗房 | Degrease and final clean between operations and before finishing | Not published |
| Chain making machines | — | Twelve link styles in continuous lengths, 0.8–12 mm gauge | Not published |
| Casting cell | 铸造部 | Wax injection, tree assembly, vacuum investment and vacuum-pressure casting in brass, bronze, zinc alloy and 925 silver | Hasung |
A model designation is stated only where the plate is legible in a photograph above — zoom in and read the same plate. The rest are left blank rather than filled in: a model number that does not match the machine in the photograph is worse than an empty cell.
What we do not claim
Every jewelry supplier lists twelve processes. Here is the part that is normally left out.
The departments above are the ones photographed on our floor. The capabilities below are part of what we deliver, but they are not yet evidenced by a photograph on this site, and until they are we are not going to present them as though they were.
A buyer who is deciding whether to trust a first order deserves to know which claims come with evidence and which come with our word. Listing that distinction costs us two rows in a table and is worth more than those rows would be.
| Capability | What it covers | Status |
|---|---|---|
| PVD / IP coating chamber | Titanium-nitride family coatings on stainless steel and titanium | Photograph pending |
| Electroplating line | Barrel and rack plating — gold, rose gold, rhodium, black | Photograph pending |
These will move into the table above once there is a photograph with the machine plate legible. Ask about any of them directly and you will get a straight answer about how that stage is run.
Capacity and terms
Headline capacity is rarely the constraint on a real order. Batch setup is.
| Established | 2011 |
|---|---|
| Floor area | 1,500 m² |
| Production staff | 300+ |
| Monthly capacity | ≈ 150k pcs |
| MOQ | 500 pcs per style, per plating colour |
| Sampling | 10 days from approved 3D file |
| Bulk production | 25 days after sample approval |
| Tooling | Quoted as a separate one-off line — buyer owns it |
| Inspection | AQL inspection report travels with the shipment |
| Testing | Arranged on request — see quality control |
Visiting and verification
Four ways to check that what is on this page is real, in ascending order of effort.
| Method | What it proves | How to arrange |
|---|---|---|
| Read the photographs on this page | That the named departments exist. Each caption is the signage in the frame, and three machine plates are legible enough to zoom in and read. | Nothing to arrange — they are on this page, above |
| Business licence & entity check | That Juntime International (HK) Co., Limited is the entity you are contracting with | Requested at quotation stage |
| Visit in person | Everything the photographs show, plus the parts of the floor you did not think to ask about | Address is published: No. 6 Sanzhong Road, Sanzhong Village, Qingxi Town, Dongguan |
| Third-party inspection | Independent verification of a specific production run against AQL | Arrange your own inspector, or we arrange one on request |
Address, telephone and email are published in full on the contact page and should match every other profile carrying this company's name.
Questions about the factory
Each answer stands alone and can be read without the rest of this page.
Are you a factory or a trading company?
A manufacturer. The production floor is in Qingxi, Dongguan, Guangdong, operating since 2011 with 300+ production staff across 1,500 m². Twelve departments and machine groups run on site — three drilling and cutting departments, punch presses, hydraulic presses, wire EDM, laser welding, laser marking, grinding and polishing, ultrasonic cleaning, chain making and a casting cell. Every one is named on this page and eleven of the twelve are photographed, with the department's own signage in frame and, on three of them, a legible machine plate carrying a model number.
Do you cut your own tooling?
Yes — stamping dies are cut in our own wire EDM room. That matters commercially rather than technically: a tooling revision does not queue behind an outside die shop, so a design change during sampling costs days rather than weeks. Most factories of this size send die work out.
How can I verify the factory is real before ordering?
Start with the photographs on this page: each is named from the department signage visible in the frame, and three carry a machine plate you can zoom in and read — DK7732 in the wire EDM room, BLADE-60 / BLADE-80 / BLADE-110 on the hydraulic presses. Then check that the entity name, address and telephone published here match LinkedIn and any B2B platform profile; brokers commonly show an office address in one place and a factory address in another. The business licence is available at quotation stage, the address is published for an in-person visit, and a third-party inspector can be sent to a specific production run.
What is your monthly production capacity?
About 150k pieces a month across the floor. Practical capacity for any single order depends far more on the process mix than on that headline figure — finishing schedules the job, not press time. Every plating or PVD colour is a separate batch with its own setup, so a three-colour range runs as three batches rather than one.
Which company entity will invoice me?
Juntime International (HK) Co., Limited is the operating entity, and the production floor is at No. 6 Sanzhong Road, Sanzhong Village, Qingxi Town, Dongguan. A Hong Kong entity invoicing against mainland China production is a common and legitimate structure for export orders; what matters is that the entity, the address and the bank details on the invoice match what is published here.
Do you handle compliance testing in-house?
Third-party testing is arranged on request. Which standards apply, what the laboratory charges and how long it takes depend on the market, the material and the batch size, so both are confirmed in writing in the quotation rather than quoted generically.
Not answered here? All buyer questions →
Check the floor before you order
Name the department your piece has to pass through and ask what happens in it — the press line, the wire EDM room, the polishing benches. A supplier brokering production out cannot answer that in detail. No minimum order, no commitment.
- 01Reply within one working day, Guangdong business hours.
- 02Itemised cost sheet — mold quoted separately, not folded into the unit price.
- 03NDA on request before any file is shared.